Embedded Systems Internship: Your First Week, Day by Day
By K. Boopathikumar, CEO & Founder · 16 November 2026 · 4 min read
Learn the hardware, the toolchain and the bench safety rules.
Day by day
- Day 1: Learn bench safety rules and set up the toolchain; flash a blink program.
- Day 2: Read the board schematic and the main datasheet sections.
- Day 3: Read the firmware structure: drivers, tasks, main loop.
- Day 4: Take a small task such as reading a new sensor value.
- Day 5: Test with serial logs or a logic analyser and document results.
Questions to ask in week one
- Which boards and debuggers do we use?
- How is firmware versioned and released?
- What are the safety rules?
- Where are schematics kept?
Every day
- Write a short daily work report: what you did, what is blocked and what is next.
- Push your work to GitHub, even if it is small.
- Ask when you have been stuck for more than about 30 minutes, with what you already tried.
Next steps
- Study the free Embedded Systems learning path and take its module quizzes for a free certificate.
- Follow the Embedded Systems skill track from basic to advanced.
- Do real, reviewed work in a Embedded Systems internship and keep every project in your own GitHub.