โ† Strength of Materials learning path
Strength of Materials ยท Module 4 of 10

Shear force and bending moment

Internal forces in beams.

๐Ÿ“– Key ideas

  1. Beams carry loads mainly by bending.
  2. Shear force at a section = sum of vertical forces on one side.
  3. Bending moment at a section = sum of moments on one side.
  4. Simply supported beam with central point load W over span L: maximum moment = W L / 4.
  5. Simply supported with uniform load w per metre: maximum moment = w L^2 / 8; cantilever with end load W: maximum moment = W L at the support.
๐Ÿ’ก Real-life example: Like a plank bridge over a stream: it sags most in the middle when you stand at the centre.
Shear forceInternal vertical force at a beam section
Bending momentInternal moment at a beam section
Simply supported beamBeam on a pin and a roller
CantileverBeam fixed at one end, free at the other