โ† Strength of Materials learning path
Strength of Materials ยท Module 10 of 10

Combined stresses, pressure vessels and design

Real components under complex loads.

๐Ÿ“– Key ideas

  1. Components often face combined axial, bending and torsional stresses.
  2. Principal stresses are the maximum and minimum normal stresses on a plane with zero shear; Mohr's circle finds them graphically.
  3. Thin cylinder under internal pressure p: hoop stress = p d / (2t), longitudinal stress = p d / (4t).
  4. Failure theories (maximum shear stress, von Mises) predict yielding under combined stress.
  5. Good design checks strength, stiffness, stability, fatigue and safety factors.
๐Ÿ’ก Real-life example: Like an LPG cylinder: internal pressure stretches the walls, and hoop stress is twice the longitudinal stress.
Principal stressNormal stress on a plane with zero shear
Mohr's circleGraphical method for stress transformation
Hoop stressCircumferential stress in a pressurised cylinder
FatigueFailure under repeated loading