โ Fluid Mechanics learning pathFluid Mechanics ยท Module 6 of 10
Flow measurement and orifices
Measuring discharge in practice.
๐ Key ideas
- Orifice: an opening through which fluid flows; actual discharge = Cd x theoretical discharge.
- Coefficient of discharge Cd = Cc x Cv (contraction x velocity coefficients); typically about 0.6 for sharp orifices.
- Venturimeters have high Cd (about 0.95 to 0.98) and low head loss.
- Orifice meters are cheap but cause more head loss.
- Notches and weirs measure open-channel flow.
๐ก Real-life example: Like measuring water from a tap: the jet narrows just after leaving, at the vena contracta.
OrificeOpening for fluid flow
Coefficient of dischargeActual over theoretical discharge
Vena contractaNarrowest section of a jet
WeirBarrier used to measure open-channel flow