โ Control Systems learning pathControl Systems ยท Module 1 of 10
Introduction to control
Open-loop and closed-loop systems.
๐ Key ideas
- A control system makes an output follow a desired value (the set point or reference).
- Open-loop systems act without measuring the output: a basic toaster or washing timer.
- Closed-loop (feedback) systems measure the output and correct the error: air conditioner thermostat, cruise control.
- Error = reference - measured output; the controller acts to reduce it.
- Feedback improves accuracy and rejects disturbances but can cause instability if badly designed.
๐ก Real-life example: Open loop is driving with your eyes closed after planning the route; closed loop is watching the road and steering continuously.
Set pointDesired value of the output
Open-loop systemControl without measuring the output
Closed-loop systemControl that uses feedback of the output
Error signalDifference between reference and output