Wifi Extender

Abstract

1. Introduction

Truly WiFi Extender is a WiFi repeater based on Raspberry Pi Zero W. It makes a nice alternative to a commercial WiFi repeater combining low-cost (under 10USD) and highly customizable software. It can also run some ad-blocking solutions such as pi- hole as well. This project is one of a kind because most of the projects on GitHub demonstrate how to create a wireless AP to share Internet access obtained using Ethernet.

This will run on any version of Raspberry Pi. But make sure to have two wifi adapters. Nowadays, Raspberry Pi comes with onboard WiFi. In case you have an older version, you might have to use two USB WiFi adapters. I will be using a single USB WiFi adapter since I am using Raspberry Pi Zero W.

For this project, I will be using Raspbian Stretch Lite. You can download it on the official Raspberry Pi website. You can use the newer version of Raspbian as well.

2. Objective

A WiFi repeater built around Raspberry Pi under 10 US$

This project demonstrates how Shell, Raspberry Pi can be applied to a real-world Internet of Things (IoT) problem.

4. Technology Stack

5. System Requirements

General requirements for this technology stack — check the README for exact versions.

• Linux / macOS terminal or WSL on Windows
• Git (to clone the repository)

6. Installation & Setup

git clone https://github.com/mrtejas99/wifi-extender.git
cd wifi-extender

Full setup instructions are in the project README.

7. Future Enhancements

Suggested extensions you can add to make this your own project.

• Add a mobile dashboard using Blynk or Firebase
• Store readings in a cloud database for history charts
• Add alerts via SMS / Telegram when thresholds are crossed

8. Viva / Review Questions

Common questions examiners ask for projects in this domain.

1. Which microcontroller / board and sensors are used and why?
2. How does the device send data (Wi-Fi, MQTT, HTTP, Bluetooth)?
3. Where is the sensor data stored and visualised?
4. How is power consumption managed?
5. How would you secure the device and its communication?

9. Source Code & License

This project is developed by mrtejas99 and published on GitHub under the GNU General Public License v3.0. Please follow the license terms and credit the original author when you use or modify this code.